{"id":2775,"date":"2021-03-13T20:38:09","date_gmt":"2021-03-14T01:38:09","guid":{"rendered":"https:\/\/pressbooks.bccampus.ca\/autocad\/?post_type=chapter&p=2775"},"modified":"2021-07-15T15:23:25","modified_gmt":"2021-07-15T19:23:25","slug":"dimensioning-part-2","status":"publish","type":"chapter","link":"https:\/\/pressbooks.bccampus.ca\/autocad\/chapter\/dimensioning-part-2\/","title":{"raw":"Module 38: Dimensioning - Part 2","rendered":"Module 38: Dimensioning – Part 2"},"content":{"raw":"
\r\n

Learning Outcomes<\/p>\r\n\r\n<\/header>\r\n

\r\n\r\nWhen you have completed this module, you will be able to:\r\n
    \r\n \t
  1. Describe the six basic dimensioning types.<\/li>\r\n \t
  2. Apply the DIMLINEAR, DIMALIGNED, DIMANGULAR, DIMDIAMETER, DIMRADIUS, and QLEADER commands to dimension a drawing.<\/li>\r\n \t
  3. Edit inserted dimensions using the Properties window.<\/li>\r\n<\/ol>\r\n<\/div>\r\n<\/div>\r\n

    Drafting Lesson Basic Dimension Types<\/h1>\r\nFigure 38-1 shows the six basic dimension types that will be taught in this module. They are the linear, aligned, angular, diameter, radius, and leader dimensions.\r\n\r\n[caption id=\"attachment_2777\" align=\"aligncenter\" width=\"500\"]\"\" Figure 38-1
    Basic Dimensioning Types[\/caption]\r\n

    Inserting Dimensions<\/h2>\r\nIn this module, inserting and editing linear<\/em>, aligned<\/em>, angular<\/em>, radius<\/em>, <\/span>diameter<\/span>, <\/em>and leader <\/em><\/span>dimensions will be taught. When a dimension is inserted, it resides on the current layer and assumes the color of that layer.\r\n
    \r\n\r\nUSER TIP:<\/strong> The current dimensioning style will appear in the Dimensioning toolbar, the Styles toolbar, and Home ribbon. A quick way to check or change the current dimensioning style is with one of these drop-down menus. Try to get into the habit of using the Dimensioning toolbar or the Home ribbon to insert dimensions. It will speed your drawing productivity.\r\n\r\n[caption id=\"attachment_2782\" align=\"aligncenter\" width=\"625\"]\"\" Style Toolbar[\/caption]\r\n\r\n[caption id=\"attachment_2779\" align=\"aligncenter\" width=\"667\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n[caption id=\"attachment_2780\" align=\"aligncenter\" width=\"271\"]\"\" Home Ribbon[\/caption]\r\n\r\n \r\n\r\n[caption id=\"attachment_2783\" align=\"aligncenter\" width=\"422\"]\"\" Home Ribbon[\/caption]\r\n\r\n<\/div>\r\n
    \r\n\r\nMUST KNOW: <\/strong>Before dimensioning a drawing, it is important to check the following settings:\r\n
      \r\n \t
    1. The current layer. That is the layer that the inserted dimensions will reside on.<\/li>\r\n \t
    2. The current dimensioning style. The dimensions that you insert, with any dimensioning command, will use the properties of the current dimensioning style.<\/li>\r\n \t
    3. The DIMASSOC setting. This setting controls whether the inserted dimensions will be inserted as associative dimensions or exploded dimensions.<\/li>\r\n<\/ol>\r\n<\/div>\r\n
      \r\n

      AutoCAD Command: DIMLINEAR<\/strong><\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe DIMLINEAR command is used to insert a linear dimension. A linear dimension is a dimension that is either horizontal or vertical.\r\n\r\nShortcut: DIMLIN<\/strong>\r\n\r\n[caption id=\"attachment_2784\" align=\"aligncenter\" width=\"329\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n[caption id=\"attachment_2785\" align=\"aligncenter\" width=\"216\"]\"\" Dimension Pull-down[\/caption]\r\n\r\n[caption id=\"attachment_2786\" align=\"aligncenter\" width=\"308\"]\"\" Linear Dimension[\/caption]\r\n\r\n[caption id=\"attachment_2787\" align=\"aligncenter\" width=\"252\"]\"\" Home Ribbon[\/caption]\r\n\r\n<\/div>\r\n<\/div>\r\n
      \r\n

      AutoCAD Command: DIMALIGNED<\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe DIMALIGNED command is used to insert an aligned dimension.\r\n\r\nShortcut: DIMALI<\/strong>\r\n\r\n[caption id=\"attachment_2789\" align=\"aligncenter\" width=\"354\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n[caption id=\"attachment_2790\" align=\"aligncenter\" width=\"216\"]\"\" Dimension Pull-down[\/caption]\r\n\r\n[caption id=\"attachment_2796\" align=\"aligncenter\" width=\"250\"]\"\" Aligned Dimension[\/caption]\r\n\r\n[caption id=\"attachment_2792\" align=\"aligncenter\" width=\"251\"]\"\" Home Ribbon[\/caption]\r\n\r\n<\/div>\r\n<\/div>\r\n
      \r\n

      AutoCAD Command: DIMANGULAR<\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe DIMANGULAR command is used to insert an angular dimension.\r\n\r\nShortcut: DIMANG<\/strong>\r\n\r\n[caption id=\"attachment_2793\" align=\"aligncenter\" width=\"409\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n[caption id=\"attachment_2799\" align=\"aligncenter\" width=\"216\"]\"\" Dimension Pull-down[\/caption]\r\n\r\n[caption id=\"attachment_2797\" align=\"aligncenter\" width=\"267\"]\"\" Angular Dimension[\/caption]\r\n\r\n[caption id=\"attachment_2800\" align=\"aligncenter\" width=\"251\"]\"\" Home Ribbon[\/caption]\r\n\r\n<\/div>\r\n<\/div>\r\n
      \r\n

      AutoCAD Command: DIMDIAMETER<\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe DIMDIAMETER command is used to insert a diameter dimension.\r\n\r\nShortcut: DIMDIA<\/strong>\r\n\r\n[caption id=\"attachment_2801\" align=\"aligncenter\" width=\"667\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n\"\"\r\n\r\n[caption id=\"attachment_2803\" align=\"aligncenter\" width=\"309\"]\"\" Diameter Dimension[\/caption]\r\n\r\n\"\"\r\n\r\n<\/div>\r\n<\/div>\r\n
      \r\n

      AutoCAD Command: DIMRADIUS<\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe DIMRADIUS command is used to insert a radius dimension.\r\n\r\nShortcut: DIMRAD<\/strong>\r\n\r\n[caption id=\"attachment_2808\" align=\"aligncenter\" width=\"417\"]\"\" Dimension Toolbar[\/caption]\r\n\r\n\"\"\r\n\r\n[caption id=\"attachment_2806\" align=\"aligncenter\" width=\"305\"]\"\" Radius Dimension[\/caption]\r\n\r\n\"\"\r\n\r\n<\/div>\r\n<\/div>\r\n

      WORKALONG: Inserting Linear, Aligned, Angular, Diameter and Radius Dimensions<\/h1>\r\n

      Step 1<\/h2>\r\nOpen the drawing: AutoCAD 2D Workalong 37-1<\/span>. (Figure Step 1)\r\n\r\n[caption id=\"attachment_2814\" align=\"aligncenter\" width=\"317\"]\"\" Figure Step 1[\/caption]\r\n

      Step 2<\/h2>\r\nUsing the SAVEAS command, save and name the drawing: AutoCAD 2D Workalong 38-1<\/span>.\r\n

      Step 3<\/h2>\r\nEnter the DIMASSOC system variable, as shown below, and ensure that it is set to 2. This will enable associative dimensions.\r\n\r\nCommand: DIMASSOC<\/strong>\r\n\r\nEnter new value for DIMASSOC <1>: 2<\/strong>\r\n\r\nCommand:\r\n

      Step 4<\/h2>\r\nEnable the display of the Dimension toolbar. Set the current dimensioning style to: Module 37. (Figure Step 4)\r\n\r\n[caption id=\"attachment_2815\" align=\"aligncenter\" width=\"650\"]\"\" Figure Step 4[\/caption]\r\n

      Step 5<\/h2>\r\nSet layer: Dimensions as the current layer and set Paper space as the current space.\r\n
      AUTHOR'S COMMENTS: <\/strong>Ensure that you are working in Paper space when inserting dimensions and snap to Model space objects when placing the dimensions. Do not snap to Paper space objects.<\/div>\r\n

      Step 6<\/h2>\r\nDelete the center lines for the circle. (Figure Step 6)\r\n\r\n[caption id=\"attachment_2816\" align=\"aligncenter\" width=\"253\"]\"\" Figure Step 6[\/caption]\r\n\r\n
      AUTHOR'S COMMENTS: <\/strong>You will see later in the workalong why you are doing this.<\/div>\r\n

      Step 7<\/h2>\r\nTurn layer: Center Lines<\/span> off.\r\n
      \r\n

      Step 8<\/h2>\r\nEnter the DIMLIN command, as shown below, to insert a linear dimension. (Figure Step 8)\r\n\r\nCommand: DIMLIN<\/strong>\r\n\r\nSpecify first extension line origin or <select object>: (end) <\/em>P1<\/strong>\r\n\r\nSpecify second extension line origin: (end) P2<\/strong>\r\n\r\n(Ensure to snap to the ends of the lines.)<\/em><\/span>\r\n\r\nSpecify dimension line location or [Mtext\/Text\/Angle\/Horizontal\/Vertical\/Rotated]: P3<\/strong>\r\n\r\n<\/div>\r\n(You can place the location of P3 by eye. Try to match the figure the best you can.)<\/em><\/span>\r\n\r\nDimension text = 4.50\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2817\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 8[\/caption]\r\n\r\n
      AUTHOR'S COMMENTS: <\/strong>Since you should always snap to Model space drawing objects when dimensioning a model, I had you temporarily turn off layer Center Lines.\r\n<\/strong><\/div>\r\n

      Step 9<\/h2>\r\nUsing what you just learned, add the linear dimensions to match the figure. (Figure Step 9)\r\n\r\n[caption id=\"attachment_2818\" align=\"aligncenter\" width=\"412\"]\"\" Figure Step 9[\/caption]\r\n

      Step 10<\/h2>\r\nEnter the DIMALI command, as shown below, to insert an aligned dimension. (Figure Step 10)\r\n\r\nCommand: DIMALI<\/strong>\r\n\r\nSpecify first extension line origin or <select object>: (end) <\/span><\/em>P4<\/strong>\r\n\r\nSpecify second extension line origin: (end) <\/em><\/span>P5<\/strong>\r\n\r\nSpecify dimension line location or [Mtext\/Text\/Angle]: P6<\/strong>\r\n\r\nDimension text = 4.66\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2819\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 10[\/caption]\r\n

      Step 11<\/h2>\r\nUsing what you just learned, add the aligned dimensions to match the figure. (Figure Step 11).\r\n\r\n[caption id=\"attachment_2820\" align=\"aligncenter\" width=\"426\"]\"\" Figure Step 11[\/caption]\r\n

      Step 12<\/h2>\r\nEnter the DIMDIA command, as shown below, to insert a diameter dimension as shown in the figure. (Figure Step 12)\r\n\r\nCommand: DIMDIA <\/strong>\r\n\r\nSelect arc or circle: P7 <\/strong>\r\n\r\nDimension text = 1.00\r\n\r\nSpecify dimension line location or [Mtext\/Text\/Angle]: P8<\/strong>\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2821\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 12[\/caption]\r\n

      Step 13<\/h2>\r\nEnter the DIMRAD command, as shown below, to insert a radius dimension. (Figure Step 13)\r\n\r\nCommand: DIMRAD <\/strong>Select arc or circle: P9 <\/strong>\r\n\r\nDimension text = 2.56\r\n\r\nSpecify dimension line location or [Mtext\/Text\/Angle]: P10<\/strong>\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2822\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 13[\/caption]\r\n

      Step 14<\/h2>\r\nUsing what you just learned, add a second radius dimension to match the figure. (Figure Step 14)\r\n\r\n[caption id=\"attachment_2823\" align=\"aligncenter\" width=\"474\"]\"\" Figure Step 14[\/caption]\r\n

      Step 15<\/h2>\r\nEnter the DIMANG command, as shown below, to insert an angular dimension. (Figure Step 15)\r\n\r\nCommand: DIMANG<\/strong>\r\n\r\nSelect arc, circle, line, or <specify vertex>: P11<\/strong>\r\n\r\nSelect second line: P12<\/strong>\r\n\r\nSpecify dimension arc line location or [Mtext\/Text\/Angle]: P13<\/strong>\r\n\r\nDimension text = 75d0'0\"\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2824\" align=\"aligncenter\" width=\"691\"]\"\" Figure Step 15[\/caption]\r\n

      Step 16<\/h2>\r\nYour drawing should be similar to the figure. (Figure Step 16)\r\n\r\n[caption id=\"attachment_2825\" align=\"aligncenter\" width=\"480\"]\"\" Figure Step 16[\/caption]\r\n\r\n
      AUTHOR'S COMMENTS: <\/strong>After you have inserted all the required associative dimensions, make any corrections that are required to them by changing the properties of the dimensions that need correcting using the Properties window.\r\n<\/strong><\/div>\r\n

      Step 17<\/h2>\r\nOpen the Properties window. Select the two radius dimensions shown in the figure. Set the Center mark property to None. (Figure Step 17)\r\n\r\n[caption id=\"attachment_2826\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 17[\/caption]\r\n\r\n
      AUTHOR'S COMMENTS: <\/strong>This step will remove the center line inserted with the radius dimension.<\/div>\r\n

      Step 18<\/h2>\r\nSelect the two linear dimensions shown in the figure. Set the Ext line offset property to 0.1800. (Figure Step 18)\r\n\r\n[caption id=\"attachment_2827\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 18[\/caption]\r\n\r\n
      MUST KNOW: <\/strong>When AutoCAD finds the dimension or measures the object in a dimensioning command, it does not display the actual number. It displays the symbol <>. This symbol means default or the actual measurement. To add the text REF after the actual measurement, enter it as: <> REF.<\/div>\r\n

      Step 19<\/h2>\r\nSelect the aligned dimension shown in the figure. Set the Text override property to < > REF. (Figure Step 19)\r\n\r\n[caption id=\"attachment_2828\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 19[\/caption]\r\n\r\n
      \r\n\r\nAUTHOR'S COMMENTS: <\/strong>The <> means default or the actual dimension that AutoCAD measured. If sometime in the future the size changes, the dimension will also change.\r\n\r\n<\/div>\r\n
      USER TIP: <\/strong>The fastest way to dimension an object is to dimension it very quickly, inserting all the required dimensions. When all the dimensions are inserted, change them using the Properties window, if necessary. This is much faster than fixing the dimensions as they are inserted.<\/div>\r\n

      Step 20<\/h2>\r\nSelect the aligned dimension shown in the figure. Change the property Ext Line 2 to Off. This will turn off the display of one of the extension lines since it is on object line. Depending on the order that you used when inserting the dimension, you may have to set Ext Line 1 instead. (Figure Step 20)\r\n\r\n[caption id=\"attachment_2830\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 20[\/caption]\r\n

      Step 21<\/h2>\r\nTurn layer: Center Lines<\/span> on. Your drawing should match the figures. (Figure Step 21)\r\n\r\n[caption id=\"attachment_2831\" align=\"aligncenter\" width=\"528\"]\"\" Figure Step 21[\/caption]\r\n

      Step 22<\/h2>\r\nUsing what you learned earlier, insert the angular dimension as shown in the figure. (Figure Step 22)\r\n\r\n[caption id=\"attachment_2832\" align=\"aligncenter\" width=\"359\"]\"\" Figure Step 22[\/caption]\r\n

      Step 23<\/h2>\r\nYour drawing should closely match the figure. (Figure Step 23A and 23B)\r\n\r\n[caption id=\"attachment_2833\" align=\"aligncenter\" width=\"400\"]\"\" Figure Step 23A[\/caption]\r\n\r\n[caption id=\"attachment_2834\" align=\"aligncenter\" width=\"294\"]\"\" Figure Step 23B[\/caption]\r\n

      Step 24<\/h2>\r\nTurn layer: Viewport off. Fill in the titleblock. (Figure Step 24)\r\n\r\n[caption id=\"attachment_2835\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 24[\/caption]\r\n

      Step 25<\/h2>\r\nSave and close the drawing.\r\n\r\n[caption id=\"attachment_2836\" align=\"aligncenter\" width=\"982\"]\"\" Figure 38-2
      Object Snap Mode - Near[\/caption]\r\n\r\n
      \r\n

      AutoCAD Command: QLEADER<\/p>\r\n\r\n<\/header>\r\n

      \r\n\r\nThe QLEADER command is used to a leader dimension.\r\n\r\nShortcut: none\r\n\r\n<\/div>\r\n<\/div>\r\n
      \r\n\r\nUSER TIP: <\/strong>The snap mode nearest can be used for many purposes while drawing in AutoCAD. To snap to an object, but not any particular location on that object, use the nearest snap mode. It is best to manually type the near snap mode, when required, rather then including it in the Autosnap settings. i.e.\r\n\r\nCommand: LINE<\/strong>\r\n\r\nSpecify first point: near <\/strong>to\"\"\r\n\r\n<\/div>\r\n

      WORKALONG: Inserting Leaders<\/h1>\r\n

      Step 1<\/h2>\r\nOpen the drawing: AutoCAD 2D Workalong 38-1<\/span>. (Figure Step 1)\r\n\r\n[caption id=\"attachment_2838\" align=\"aligncenter\" width=\"258\"]\"\" Figure Step 1[\/caption]\r\n

      Step 2<\/h2>\r\nEnter the QLEADER command, as shown below, and enter the Settings option. It will open the Leader Settings dialogue box. Enable the Annotation tab. Ensure that the dialogue box matches the settings in the figure. (Figure Step 2)\r\n\r\nCommand: QLEADER<\/strong>\r\n\r\nSpecify first leader point, or [Settings]: S<\/strong>\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2839\" align=\"aligncenter\" width=\"400\"]\"\" Figure Step 2[\/caption]\r\n

      Step 3<\/h2>\r\nEnable the Leader Line and Arrow tab. Ensure that your dialogue box matches the settings in the figure. (Figure Step 3)\r\n\r\n[caption id=\"attachment_2840\" align=\"aligncenter\" width=\"400\"]\"\" Figure Step 3[\/caption]\r\n

      Step 4<\/h2>\r\nEnable the Attachment tab. Ensure that your dialogue box matches the settings in the figure. (Figure Step 4)\r\n\r\n[caption id=\"attachment_2842\" align=\"aligncenter\" width=\"400\"]\"\" Figure Step 4[\/caption]\r\n

      Step 5<\/h2>\r\nEnter the QLEADER command, as shown below, to insert the leader. (Figure Step 5)\r\n\r\nCommand: QLEADER<\/strong>\r\n\r\nSpecify first leader point, or [Settings] <Settings>: (near)<\/span> <\/em>P13<\/strong>\r\n\r\n(Use the Near osnap mode)<\/em><\/span>\r\n\r\nSpecify next point: P14<\/strong>\r\n\r\nSpecify next point: <Ortho on> P15<\/strong>\r\n\r\n(I enabled Ortho mode to ensure the line is horizontal.)<\/em><\/span>\r\n\r\nSpecify text width <0.0000>:\r\n\r\nEnter first line of annotation text <Mtext>: MATCHING <\/strong>\r\n\r\nEnter next line of annotation text <Mtext>: EDGE\u00a0 <\/strong>\r\n\r\nEnter next line of annotation text:\r\n\r\nCommand:\r\n\r\n[caption id=\"attachment_2843\" align=\"aligncenter\" width=\"300\"]\"\" Figure Step 5[\/caption]\r\n

      Step 6<\/h2>\r\nUsing what you just learned, add the leader START X5.5Y4.5 as shown in the figure. Your completed drawing shown now appear similar to the figure. (Figure Step 6)\r\n\r\n[caption id=\"attachment_2844\" align=\"aligncenter\" width=\"459\"]\"\" Figure Step 6[\/caption]\r\n

      Step 7<\/h2>\r\nSave and close the drawing.\r\n

      Key Principles<\/h1>\r\n
      \r\n

      Key Principles in Module 38<\/p>\r\n\r\n<\/header>\r\n

      \r\n
        \r\n \t
      1. When AutoCAD finds the dimension or measures the object in a dimensioning command, it does not display the actual number. The symbol <> is displayed. This symbol means default or the actual measurement.<\/li>\r\n \t
      2. To make corrections to inserted associative dimensions, change the properties of the dimension using the Properties window.<\/li>\r\n<\/ol>\r\n<\/div>\r\n<\/div>\r\n

        Lab Exercise 38-1<\/h1>\r\nTime allowed: 30 minutes.\r\n\r\n\r\n\r\n\r\n
        Drawing Name<\/th>\r\nTemplate<\/th>\r\nUnits<\/th>\r\n<\/tr>\r\n
        AutoCAD 2D Lab 38-1<\/td>\r\nN\/A<\/td>\r\nInches<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n

        Step 1<\/h2>\r\nOpen the drawing: AutoCAD 2D Lab 37-1<\/span>. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-1<\/span>.\r\n

        Step 2<\/h2>\r\nSet the current dimension style to: 2D English.<\/span>\r\n

        Step 3<\/h2>\r\nEnsure that associate dimensioning is enabled by checking the setting of the DIMASSOC system variable.\r\n

        Step 4<\/h2>\r\nIn Paper space, on layer: Dimensions, insert the dimensions shown in the figure. Match the figure the best you can. (Figure step 4A and 4B)\r\n\r\n[caption id=\"attachment_2845\" align=\"aligncenter\" width=\"318\"]\"\" Figure Step 4A
        Completed Drawing[\/caption]\r\n\r\n[caption id=\"attachment_2846\" align=\"aligncenter\" width=\"500\"]\"\" Figure Step 4B[\/caption]\r\n

        Step 5<\/h2>\r\nTurn layer: Viewport<\/span> off.\r\n

        Step 6<\/h2>\r\nUsing the standards in Module 20, complete the titleblock.\r\n

        Lab Exercise 38-2<\/h1>\r\nTime allowed: 30 minutes.\r\n\r\n\r\n\r\n\r\n
        Drawing Name<\/th>\r\nTemplate<\/th>\r\nUnits<\/th>\r\n<\/tr>\r\n
        AutoCAD 2D Lab 38-2<\/td>\r\nN\/A<\/td>\r\nMillimeters<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n

        Step 1<\/h2>\r\nOpen the drawing: AutoCAD 2D Lab 37-2. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-2.\r\n

        Step 2<\/h2>\r\nSet the current dimension style to: 2D Metric.\r\n

        Step 3<\/h2>\r\nEnsure that associate dimensioning is enabled by checking the setting of the DIMASSOC system variable.\r\n

        Step 4<\/h2>\r\nIn Paper space, on layer: Dimensions, insert the dimensions shown in the figure. Match the figure the best you can. Figure step 4A and 4B)\r\n\r\n[caption id=\"attachment_2847\" align=\"aligncenter\" width=\"283\"]\"\" Figure Step 4A[\/caption]\r\n\r\n[caption id=\"attachment_2848\" align=\"aligncenter\" width=\"500\"]\"\" Figure Step 4B[\/caption]\r\n

        Step 5<\/h2>\r\nTurn layer: Viewport<\/span> off.\r\n

        Step 6<\/h2>\r\nUsing the standards in Module 20, complete the titleblock.\r\n

        Lab Exercise 38-3<\/h1>\r\nTime allowed: 40 minutes.\r\n\r\n\r\n\r\n\r\n
        Drawing Name<\/th>\r\nTemplate<\/th>\r\nUnits<\/th>\r\n<\/tr>\r\n
        AutoCAD 2D Lab 38-3<\/td>\r\nN\/A<\/td>\r\nInches<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n

        Step 1<\/h2>\r\nOpen the drawing: AutoCAD 2D Lab 37-3<\/span>. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-3<\/span>.\r\n

        Step 2<\/h2>\r\nSet the current dimension style to: 2D English<\/span>.\r\n

        Step 3<\/h2>\r\nEnsure that associate dimensioning is enabled by checking the setting of DIMASSOC.\r\n

        Step 4<\/h2>\r\nIn Paper space, on layer: Dimensions<\/span>, insert the dimensions shown in the figure. Match the figure the best you can. (Figure step 4A and 4B)\r\n\r\n[caption id=\"attachment_2849\" align=\"aligncenter\" width=\"326\"]\"\" Figure Step 4A[\/caption]\r\n\r\n[caption id=\"attachment_2850\" align=\"aligncenter\" width=\"600\"]\"\" Figure Step 4B[\/caption]\r\n

        Step 5<\/h2>\r\nTurn layer: Viewport<\/span> off.\r\n

        Step 6<\/h2>\r\nUsing the standards in Module 20, complete the titleblock.","rendered":"
        \n
        \n

        Learning Outcomes<\/p>\n<\/header>\n

        \n

        When you have completed this module, you will be able to:<\/p>\n

          \n
        1. Describe the six basic dimensioning types.<\/li>\n
        2. Apply the DIMLINEAR, DIMALIGNED, DIMANGULAR, DIMDIAMETER, DIMRADIUS, and QLEADER commands to dimension a drawing.<\/li>\n
        3. Edit inserted dimensions using the Properties window.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n

          Drafting Lesson Basic Dimension Types<\/h1>\n

          Figure 38-1 shows the six basic dimension types that will be taught in this module. They are the linear, aligned, angular, diameter, radius, and leader dimensions.<\/p>\n

          \"\"
          Figure 38-1
          Basic Dimensioning Types<\/figcaption><\/figure>\n

          Inserting Dimensions<\/h2>\n

          In this module, inserting and editing linear<\/em>, aligned<\/em>, angular<\/em>, radius<\/em>, <\/span>diameter<\/span>, <\/em>and leader <\/em><\/span>dimensions will be taught. When a dimension is inserted, it resides on the current layer and assumes the color of that layer.<\/p>\n

          \n

          USER TIP:<\/strong> The current dimensioning style will appear in the Dimensioning toolbar, the Styles toolbar, and Home ribbon. A quick way to check or change the current dimensioning style is with one of these drop-down menus. Try to get into the habit of using the Dimensioning toolbar or the Home ribbon to insert dimensions. It will speed your drawing productivity.<\/p>\n

          \"\"
          Style Toolbar<\/figcaption><\/figure>\n
          \"\"
          Dimension Toolbar<\/figcaption><\/figure>\n
          \"\"
          Home Ribbon<\/figcaption><\/figure>\n

           <\/p>\n

          \"\"
          Home Ribbon<\/figcaption><\/figure>\n<\/div>\n
          \n

          MUST KNOW: <\/strong>Before dimensioning a drawing, it is important to check the following settings:<\/p>\n

            \n
          1. The current layer. That is the layer that the inserted dimensions will reside on.<\/li>\n
          2. The current dimensioning style. The dimensions that you insert, with any dimensioning command, will use the properties of the current dimensioning style.<\/li>\n
          3. The DIMASSOC setting. This setting controls whether the inserted dimensions will be inserted as associative dimensions or exploded dimensions.<\/li>\n<\/ol>\n<\/div>\n
            \n
            \n

            AutoCAD Command: DIMLINEAR<\/strong><\/p>\n<\/header>\n

            \n

            The DIMLINEAR command is used to insert a linear dimension. A linear dimension is a dimension that is either horizontal or vertical.<\/p>\n

            Shortcut: DIMLIN<\/strong><\/p>\n

            \"\"
            Dimension Toolbar<\/figcaption><\/figure>\n
            \"\"
            Dimension Pull-down<\/figcaption><\/figure>\n
            \"\"
            Linear Dimension<\/figcaption><\/figure>\n
            \"\"
            Home Ribbon<\/figcaption><\/figure>\n<\/div>\n<\/div>\n
            \n
            \n

            AutoCAD Command: DIMALIGNED<\/p>\n<\/header>\n

            \n

            The DIMALIGNED command is used to insert an aligned dimension.<\/p>\n

            Shortcut: DIMALI<\/strong><\/p>\n

            \"\"
            Dimension Toolbar<\/figcaption><\/figure>\n
            \"\"
            Dimension Pull-down<\/figcaption><\/figure>\n
            \"\"
            Aligned Dimension<\/figcaption><\/figure>\n
            \"\"
            Home Ribbon<\/figcaption><\/figure>\n<\/div>\n<\/div>\n
            \n
            \n

            AutoCAD Command: DIMANGULAR<\/p>\n<\/header>\n

            \n

            The DIMANGULAR command is used to insert an angular dimension.<\/p>\n

            Shortcut: DIMANG<\/strong><\/p>\n

            \"\"
            Dimension Toolbar<\/figcaption><\/figure>\n
            \"\"
            Dimension Pull-down<\/figcaption><\/figure>\n
            \"\"
            Angular Dimension<\/figcaption><\/figure>\n
            \"\"
            Home Ribbon<\/figcaption><\/figure>\n<\/div>\n<\/div>\n
            \n
            \n

            AutoCAD Command: DIMDIAMETER<\/p>\n<\/header>\n

            \n

            The DIMDIAMETER command is used to insert a diameter dimension.<\/p>\n

            Shortcut: DIMDIA<\/strong><\/p>\n

            \"\"
            Dimension Toolbar<\/figcaption><\/figure>\n

            \"\"<\/p>\n

            \"\"
            Diameter Dimension<\/figcaption><\/figure>\n

            \"\"<\/p>\n<\/div>\n<\/div>\n

            \n
            \n

            AutoCAD Command: DIMRADIUS<\/p>\n<\/header>\n

            \n

            The DIMRADIUS command is used to insert a radius dimension.<\/p>\n

            Shortcut: DIMRAD<\/strong><\/p>\n

            \"\"
            Dimension Toolbar<\/figcaption><\/figure>\n

            \"\"<\/p>\n

            \"\"
            Radius Dimension<\/figcaption><\/figure>\n

            \"\"<\/p>\n<\/div>\n<\/div>\n

            WORKALONG: Inserting Linear, Aligned, Angular, Diameter and Radius Dimensions<\/h1>\n

            Step 1<\/h2>\n

            Open the drawing: AutoCAD 2D Workalong 37-1<\/span>. (Figure Step 1)<\/p>\n

            \"\"
            Figure Step 1<\/figcaption><\/figure>\n

            Step 2<\/h2>\n

            Using the SAVEAS command, save and name the drawing: AutoCAD 2D Workalong 38-1<\/span>.<\/p>\n

            Step 3<\/h2>\n

            Enter the DIMASSOC system variable, as shown below, and ensure that it is set to 2. This will enable associative dimensions.<\/p>\n

            Command: DIMASSOC<\/strong><\/p>\n

            Enter new value for DIMASSOC <1>: 2<\/strong><\/p>\n

            Command:<\/p>\n

            Step 4<\/h2>\n

            Enable the display of the Dimension toolbar. Set the current dimensioning style to: Module 37. (Figure Step 4)<\/p>\n

            \"\"
            Figure Step 4<\/figcaption><\/figure>\n

            Step 5<\/h2>\n

            Set layer: Dimensions as the current layer and set Paper space as the current space.<\/p>\n

            AUTHOR’S COMMENTS: <\/strong>Ensure that you are working in Paper space when inserting dimensions and snap to Model space objects when placing the dimensions. Do not snap to Paper space objects.<\/div>\n

            Step 6<\/h2>\n

            Delete the center lines for the circle. (Figure Step 6)<\/p>\n

            \"\"
            Figure Step 6<\/figcaption><\/figure>\n
            AUTHOR’S COMMENTS: <\/strong>You will see later in the workalong why you are doing this.<\/div>\n

            Step 7<\/h2>\n

            Turn layer: Center Lines<\/span> off.<\/p>\n

            \n

            Step 8<\/h2>\n

            Enter the DIMLIN command, as shown below, to insert a linear dimension. (Figure Step 8)<\/p>\n

            Command: DIMLIN<\/strong><\/p>\n

            Specify first extension line origin or <select object>: (end) <\/em>P1<\/strong><\/p>\n

            Specify second extension line origin: (end) P2<\/strong><\/p>\n

            (Ensure to snap to the ends of the lines.)<\/em><\/span><\/p>\n

            Specify dimension line location or [Mtext\/Text\/Angle\/Horizontal\/Vertical\/Rotated]: P3<\/strong><\/p>\n<\/div>\n

            (You can place the location of P3 by eye. Try to match the figure the best you can.)<\/em><\/span><\/p>\n

            Dimension text = 4.50<\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 8<\/figcaption><\/figure>\n
            AUTHOR’S COMMENTS: <\/strong>Since you should always snap to Model space drawing objects when dimensioning a model, I had you temporarily turn off layer Center Lines.
            \n<\/strong><\/div>\n

            Step 9<\/h2>\n

            Using what you just learned, add the linear dimensions to match the figure. (Figure Step 9)<\/p>\n

            \"\"
            Figure Step 9<\/figcaption><\/figure>\n

            Step 10<\/h2>\n

            Enter the DIMALI command, as shown below, to insert an aligned dimension. (Figure Step 10)<\/p>\n

            Command: DIMALI<\/strong><\/p>\n

            Specify first extension line origin or <select object>: (end) <\/span><\/em>P4<\/strong><\/p>\n

            Specify second extension line origin: (end) <\/em><\/span>P5<\/strong><\/p>\n

            Specify dimension line location or [Mtext\/Text\/Angle]: P6<\/strong><\/p>\n

            Dimension text = 4.66<\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 10<\/figcaption><\/figure>\n

            Step 11<\/h2>\n

            Using what you just learned, add the aligned dimensions to match the figure. (Figure Step 11).<\/p>\n

            \"\"
            Figure Step 11<\/figcaption><\/figure>\n

            Step 12<\/h2>\n

            Enter the DIMDIA command, as shown below, to insert a diameter dimension as shown in the figure. (Figure Step 12)<\/p>\n

            Command: DIMDIA <\/strong><\/p>\n

            Select arc or circle: P7 <\/strong><\/p>\n

            Dimension text = 1.00<\/p>\n

            Specify dimension line location or [Mtext\/Text\/Angle]: P8<\/strong><\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 12<\/figcaption><\/figure>\n

            Step 13<\/h2>\n

            Enter the DIMRAD command, as shown below, to insert a radius dimension. (Figure Step 13)<\/p>\n

            Command: DIMRAD <\/strong>Select arc or circle: P9 <\/strong><\/p>\n

            Dimension text = 2.56<\/p>\n

            Specify dimension line location or [Mtext\/Text\/Angle]: P10<\/strong><\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 13<\/figcaption><\/figure>\n

            Step 14<\/h2>\n

            Using what you just learned, add a second radius dimension to match the figure. (Figure Step 14)<\/p>\n

            \"\"
            Figure Step 14<\/figcaption><\/figure>\n

            Step 15<\/h2>\n

            Enter the DIMANG command, as shown below, to insert an angular dimension. (Figure Step 15)<\/p>\n

            Command: DIMANG<\/strong><\/p>\n

            Select arc, circle, line, or <specify vertex>: P11<\/strong><\/p>\n

            Select second line: P12<\/strong><\/p>\n

            Specify dimension arc line location or [Mtext\/Text\/Angle]: P13<\/strong><\/p>\n

            Dimension text = 75d0’0″<\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 15<\/figcaption><\/figure>\n

            Step 16<\/h2>\n

            Your drawing should be similar to the figure. (Figure Step 16)<\/p>\n

            \"\"
            Figure Step 16<\/figcaption><\/figure>\n
            AUTHOR’S COMMENTS: <\/strong>After you have inserted all the required associative dimensions, make any corrections that are required to them by changing the properties of the dimensions that need correcting using the Properties window.
            \n<\/strong><\/div>\n

            Step 17<\/h2>\n

            Open the Properties window. Select the two radius dimensions shown in the figure. Set the Center mark property to None. (Figure Step 17)<\/p>\n

            \"\"
            Figure Step 17<\/figcaption><\/figure>\n
            AUTHOR’S COMMENTS: <\/strong>This step will remove the center line inserted with the radius dimension.<\/div>\n

            Step 18<\/h2>\n

            Select the two linear dimensions shown in the figure. Set the Ext line offset property to 0.1800. (Figure Step 18)<\/p>\n

            \"\"
            Figure Step 18<\/figcaption><\/figure>\n
            MUST KNOW: <\/strong>When AutoCAD finds the dimension or measures the object in a dimensioning command, it does not display the actual number. It displays the symbol <>. This symbol means default or the actual measurement. To add the text REF after the actual measurement, enter it as: <> REF.<\/div>\n

            Step 19<\/h2>\n

            Select the aligned dimension shown in the figure. Set the Text override property to < > REF. (Figure Step 19)<\/p>\n

            \"\"
            Figure Step 19<\/figcaption><\/figure>\n
            \n

            AUTHOR’S COMMENTS: <\/strong>The <> means default or the actual dimension that AutoCAD measured. If sometime in the future the size changes, the dimension will also change.<\/p>\n<\/div>\n

            USER TIP: <\/strong>The fastest way to dimension an object is to dimension it very quickly, inserting all the required dimensions. When all the dimensions are inserted, change them using the Properties window, if necessary. This is much faster than fixing the dimensions as they are inserted.<\/div>\n

            Step 20<\/h2>\n

            Select the aligned dimension shown in the figure. Change the property Ext Line 2 to Off. This will turn off the display of one of the extension lines since it is on object line. Depending on the order that you used when inserting the dimension, you may have to set Ext Line 1 instead. (Figure Step 20)<\/p>\n

            \"\"
            Figure Step 20<\/figcaption><\/figure>\n

            Step 21<\/h2>\n

            Turn layer: Center Lines<\/span> on. Your drawing should match the figures. (Figure Step 21)<\/p>\n

            \"\"
            Figure Step 21<\/figcaption><\/figure>\n

            Step 22<\/h2>\n

            Using what you learned earlier, insert the angular dimension as shown in the figure. (Figure Step 22)<\/p>\n

            \"\"
            Figure Step 22<\/figcaption><\/figure>\n

            Step 23<\/h2>\n

            Your drawing should closely match the figure. (Figure Step 23A and 23B)<\/p>\n

            \"\"
            Figure Step 23A<\/figcaption><\/figure>\n
            \"\"
            Figure Step 23B<\/figcaption><\/figure>\n

            Step 24<\/h2>\n

            Turn layer: Viewport off. Fill in the titleblock. (Figure Step 24)<\/p>\n

            \"\"
            Figure Step 24<\/figcaption><\/figure>\n

            Step 25<\/h2>\n

            Save and close the drawing.<\/p>\n

            \"\"
            Figure 38-2
            Object Snap Mode – Near<\/figcaption><\/figure>\n
            \n
            \n

            AutoCAD Command: QLEADER<\/p>\n<\/header>\n

            \n

            The QLEADER command is used to a leader dimension.<\/p>\n

            Shortcut: none<\/p>\n<\/div>\n<\/div>\n

            \n

            USER TIP: <\/strong>The snap mode nearest can be used for many purposes while drawing in AutoCAD. To snap to an object, but not any particular location on that object, use the nearest snap mode. It is best to manually type the near snap mode, when required, rather then including it in the Autosnap settings. i.e.<\/p>\n

            Command: LINE<\/strong><\/p>\n

            Specify first point: near <\/strong>to\"\"<\/p>\n<\/div>\n

            WORKALONG: Inserting Leaders<\/h1>\n

            Step 1<\/h2>\n

            Open the drawing: AutoCAD 2D Workalong 38-1<\/span>. (Figure Step 1)<\/p>\n

            \"\"
            Figure Step 1<\/figcaption><\/figure>\n

            Step 2<\/h2>\n

            Enter the QLEADER command, as shown below, and enter the Settings option. It will open the Leader Settings dialogue box. Enable the Annotation tab. Ensure that the dialogue box matches the settings in the figure. (Figure Step 2)<\/p>\n

            Command: QLEADER<\/strong><\/p>\n

            Specify first leader point, or [Settings]: S<\/strong><\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 2<\/figcaption><\/figure>\n

            Step 3<\/h2>\n

            Enable the Leader Line and Arrow tab. Ensure that your dialogue box matches the settings in the figure. (Figure Step 3)<\/p>\n

            \"\"
            Figure Step 3<\/figcaption><\/figure>\n

            Step 4<\/h2>\n

            Enable the Attachment tab. Ensure that your dialogue box matches the settings in the figure. (Figure Step 4)<\/p>\n

            \"\"
            Figure Step 4<\/figcaption><\/figure>\n

            Step 5<\/h2>\n

            Enter the QLEADER command, as shown below, to insert the leader. (Figure Step 5)<\/p>\n

            Command: QLEADER<\/strong><\/p>\n

            Specify first leader point, or [Settings] <Settings>: (near)<\/span> <\/em>P13<\/strong><\/p>\n

            (Use the Near osnap mode)<\/em><\/span><\/p>\n

            Specify next point: P14<\/strong><\/p>\n

            Specify next point: <Ortho on> P15<\/strong><\/p>\n

            (I enabled Ortho mode to ensure the line is horizontal.)<\/em><\/span><\/p>\n

            Specify text width <0.0000>:<\/p>\n

            Enter first line of annotation text <Mtext>: MATCHING <\/strong><\/p>\n

            Enter next line of annotation text <Mtext>: EDGE\u00a0 <\/strong><\/p>\n

            Enter next line of annotation text:<\/p>\n

            Command:<\/p>\n

            \"\"
            Figure Step 5<\/figcaption><\/figure>\n

            Step 6<\/h2>\n

            Using what you just learned, add the leader START X5.5Y4.5 as shown in the figure. Your completed drawing shown now appear similar to the figure. (Figure Step 6)<\/p>\n

            \"\"
            Figure Step 6<\/figcaption><\/figure>\n

            Step 7<\/h2>\n

            Save and close the drawing.<\/p>\n

            Key Principles<\/h1>\n
            \n
            \n

            Key Principles in Module 38<\/p>\n<\/header>\n

            \n
              \n
            1. When AutoCAD finds the dimension or measures the object in a dimensioning command, it does not display the actual number. The symbol <> is displayed. This symbol means default or the actual measurement.<\/li>\n
            2. To make corrections to inserted associative dimensions, change the properties of the dimension using the Properties window.<\/li>\n<\/ol>\n<\/div>\n<\/div>\n

              Lab Exercise 38-1<\/h1>\n

              Time allowed: 30 minutes.<\/p>\n\n\n\n\n
              Drawing Name<\/th>\nTemplate<\/th>\nUnits<\/th>\n<\/tr>\n
              AutoCAD 2D Lab 38-1<\/td>\nN\/A<\/td>\nInches<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

              Step 1<\/h2>\n

              Open the drawing: AutoCAD 2D Lab 37-1<\/span>. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-1<\/span>.<\/p>\n

              Step 2<\/h2>\n

              Set the current dimension style to: 2D English.<\/span><\/p>\n

              Step 3<\/h2>\n

              Ensure that associate dimensioning is enabled by checking the setting of the DIMASSOC system variable.<\/p>\n

              Step 4<\/h2>\n

              In Paper space, on layer: Dimensions, insert the dimensions shown in the figure. Match the figure the best you can. (Figure step 4A and 4B)<\/p>\n

              \"\"
              Figure Step 4A
              Completed Drawing<\/figcaption><\/figure>\n
              \"\"
              Figure Step 4B<\/figcaption><\/figure>\n

              Step 5<\/h2>\n

              Turn layer: Viewport<\/span> off.<\/p>\n

              Step 6<\/h2>\n

              Using the standards in Module 20, complete the titleblock.<\/p>\n

              Lab Exercise 38-2<\/h1>\n

              Time allowed: 30 minutes.<\/p>\n\n\n\n\n
              Drawing Name<\/th>\nTemplate<\/th>\nUnits<\/th>\n<\/tr>\n
              AutoCAD 2D Lab 38-2<\/td>\nN\/A<\/td>\nMillimeters<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

              Step 1<\/h2>\n

              Open the drawing: AutoCAD 2D Lab 37-2. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-2.<\/p>\n

              Step 2<\/h2>\n

              Set the current dimension style to: 2D Metric.<\/p>\n

              Step 3<\/h2>\n

              Ensure that associate dimensioning is enabled by checking the setting of the DIMASSOC system variable.<\/p>\n

              Step 4<\/h2>\n

              In Paper space, on layer: Dimensions, insert the dimensions shown in the figure. Match the figure the best you can. Figure step 4A and 4B)<\/p>\n

              \"\"
              Figure Step 4A<\/figcaption><\/figure>\n
              \"\"
              Figure Step 4B<\/figcaption><\/figure>\n

              Step 5<\/h2>\n

              Turn layer: Viewport<\/span> off.<\/p>\n

              Step 6<\/h2>\n

              Using the standards in Module 20, complete the titleblock.<\/p>\n

              Lab Exercise 38-3<\/h1>\n

              Time allowed: 40 minutes.<\/p>\n\n\n\n\n
              Drawing Name<\/th>\nTemplate<\/th>\nUnits<\/th>\n<\/tr>\n
              AutoCAD 2D Lab 38-3<\/td>\nN\/A<\/td>\nInches<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

              Step 1<\/h2>\n

              Open the drawing: AutoCAD 2D Lab 37-3<\/span>. Using the SAVEAS command, save and name it: AutoCAD 2D Lab 38-3<\/span>.<\/p>\n

              Step 2<\/h2>\n

              Set the current dimension style to: 2D English<\/span>.<\/p>\n

              Step 3<\/h2>\n

              Ensure that associate dimensioning is enabled by checking the setting of DIMASSOC.<\/p>\n

              Step 4<\/h2>\n

              In Paper space, on layer: Dimensions<\/span>, insert the dimensions shown in the figure. Match the figure the best you can. (Figure step 4A and 4B)<\/p>\n

              \"\"
              Figure Step 4A<\/figcaption><\/figure>\n
              \"\"
              Figure Step 4B<\/figcaption><\/figure>\n

              Step 5<\/h2>\n

              Turn layer: Viewport<\/span> off.<\/p>\n

              Step 6<\/h2>\n

              Using the standards in Module 20, complete the titleblock.<\/p>\n","protected":false},"author":1154,"menu_order":2,"template":"","meta":{"pb_show_title":"on","pb_short_title":"","pb_subtitle":"","pb_authors":[],"pb_section_license":""},"chapter-type":[],"contributor":[],"license":[],"class_list":["post-2775","chapter","type-chapter","status-publish","hentry"],"part":2658,"_links":{"self":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapters\/2775","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapters"}],"about":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/wp\/v2\/types\/chapter"}],"author":[{"embeddable":true,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/wp\/v2\/users\/1154"}],"version-history":[{"count":19,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapters\/2775\/revisions"}],"predecessor-version":[{"id":3414,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapters\/2775\/revisions\/3414"}],"part":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/parts\/2658"}],"metadata":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapters\/2775\/metadata\/"}],"wp:attachment":[{"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/wp\/v2\/media?parent=2775"}],"wp:term":[{"taxonomy":"chapter-type","embeddable":true,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/pressbooks\/v2\/chapter-type?post=2775"},{"taxonomy":"contributor","embeddable":true,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/wp\/v2\/contributor?post=2775"},{"taxonomy":"license","embeddable":true,"href":"https:\/\/pressbooks.bccampus.ca\/autocad\/wp-json\/wp\/v2\/license?post=2775"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}