Chapter 4 Dynamics: Force and Newton’s Laws of Motion

4.2 Hooke’s Law (Originally Section 5.3 Elasticity: Stress and Strain)

Summary

  • State Hooke’s law.
  • Explain Hooke’s law using graphical representation between deformation and applied force.
  • Discuss deformations such as changes in length
  • Determine the change in length given mass, length and radius.

Forces can affect an object’s shape. If a bulldozer pushes a car into a wall, the car will not move but it will noticeably change shape. A change in shape due to the application of a force is a deformation. Even very small forces are known to cause some deformation. For small deformations, two important characteristics are observed. First, the object returns to its original shape when the force is removed—that is, the deformation is elastic for small deformations. Second, the size of the deformation is proportional to the force—that is, for small deformations, Hooke’s law is obeyed. In equation form, Hooke’s law is given by

[latex]\boldsymbol{F = k\Delta{L},}[/latex]

where ΔL is the amount of deformation (the change in length, for example) produced by the force F, and k is a proportionality constant that depends on the shape and composition of the object and the direction of the force. Note that this force is a function of the deformation ΔL — it is not constant as a kinetic friction force is. Sometimes we use Δx instead of ΔL.  The deformation can be along any axis.  Rearranging this to

[latex]\boldsymbol{\Delta{L}\: = }[/latex][latex]\boldsymbol{\frac{F}{k}}[/latex]

makes it clear that the deformation is proportional to the applied force. Figure 1 shows the Hooke’s law relationship between the extension ΔL of a spring or of a human bone. For metals or springs, the straight line region in which Hooke’s law pertains is much larger. Bones are brittle and the elastic region is small and the fracture abrupt. Eventually a large enough stress to the material will cause it to break or fracture. Tensile strength is the breaking stress that will cause permanent deformation or fracture of a material.

HOOKE’S LAW

[latex]\boldsymbol{F = k\Delta{L},}[/latex]

where ΔL is the amount of deformation (the change in length, for example) produced by the force F, and k is a proportionality constant that depends on the shape and composition of the object and the direction of the force.

[latex]\boldsymbol{\Delta{L}\:=}[/latex][latex]\boldsymbol{\frac{F}{k}}[/latex]
Line graph of change in length versus applied force. The line has a constant positive slope from the origin in the region where Hooke’s law is obeyed. The slope then decreases, with a lower, still positive slope until the end of the elastic region. The slope then increases dramatically in the region of permanent deformation until fracturing occurs.
Figure 1. A graph of deformation ΔL versus applied force F. The straight segment is the linear region where Hooke’s law is obeyed. The slope of the straight region is 1 / k. For larger forces, the graph is curved but the deformation is still elastic—ΔL will return to zero if the force is removed. Still greater forces permanently deform the object until it finally fractures. The shape of the curve near fracture depends on several factors, including how the force F is applied. Note that in this graph the slope increases just before fracture, indicating that a small increase in F is producing a large increase in L near the fracture.

The proportionality constant k depends upon a number of factors for the material. For example, a guitar string made of nylon stretches when it is tightened, and the elongation ΔL is proportional to the force applied (at least for small deformations). Thicker nylon strings and ones made of steel stretch less for the same applied force, implying they have a larger k (see Figure 2). Finally, all three strings return to their normal lengths when the force is removed, provided the deformation is small. Most materials will behave in this manner if the deformation is less than about 0.1% or about 1 part in 103.

Diagram of weight w attached to each of three guitar strings of initial length L zero hanging vertically from a ceiling. The weight pulls down on the strings with force w. The ceiling pulls up on the strings with force w. The first string of thin nylon has a deformation of delta L due to the force of the weight pulling down. The middle string of thicker nylon has a smaller deformation. The third string of thin steel has the smallest deformation.
Figure 2. The same force, in this case a weight (w), applied to three different guitar strings of identical length produces the three different deformations shown as shaded segments. The string on the left is thin nylon, the one in the middle is thicker nylon, and the one on the right is steel.

STRETCH YOURSELF A LITTLE

How would you go about measuring the proportionality constant k of a rubber band? If a rubber band stretched 3 cm when a 100-g mass was attached to it, then how much would it stretch if two similar rubber bands were attached to the same mass—even if put together in parallel or alternatively if tied together in series?

 

Conceptual Questions

1: How is a bow and arrow like a spring?

Problems & Exercises

  1. A mass is suspended from a vertical spring such that it exerts a downwards force of magnitude 5.02 newtons on the spring.  The spring stretches 0.0456 metres when the mass is attached to it.  What is the spring constant in newton/metres?  Hint:  Suspended means hanging in the air not moving.  What is the net force on a mass that is not moving?
  2. The shock absorbers on my car have a spring constant of 97,722 newton/metres. When a certain person sits in the car they exert a downwards force of 987 newtons on the car.  How far “down” does the car move after they sit in it?    (Watch the movie “The Italian Job” and see how  they used this type of physics to figure out which truck was actually carrying the gold.)
  3. A spring balance has a spring constant of 34.5 newton/metres and it stretches 3.21 centimetres when an unknown mass is attached to it.  What is the force in newtons exerted on the spring by the unknown mass?
  4. If an applied force of 12 newtons stretches a certain spring 4.0 centimetres, how much stretch will occur for an applied force of 18 newtons?

 

Solutions

Problems & Exercises

1) 110 N/m

2) 0.0101 m = 1.01 cm

3) 1.11 newtons

4) 6.0 cm       By ratio and proportion    12 N / 4.0 cm = 18 N/ ?    so ? = 18 x 4 / 12 =

 

 

We now consider the type of deformation that will cause a change in length (tension and compression).   There are also sideways forces that cause shear (stress), and changes in volume, but we will not go into detail about them in this course.

Changes in Length—Tension and Compression: Elastic Modulus

A change in length ΔL is produced when a force is applied to a wire or rod parallel to its length L0, either stretching it (a tension) or compressing it. (See Figure 3.)

Figure a is a cylindrical rod standing on its end with a height of L sub zero. Two vectors labeled F extend away from each end. A dotted outline indicates that the rod is stretched by a length of delta L. Figure b is a similar rod of identical height L sub zero, but two vectors labeled F exert a force toward the ends of the rod. A dotted line indicates that the rod is compressed by a length of delta L.
Figure 3. (a) Tension. The rod is stretched a length ΔL when a force is applied parallel to its length. (b) Compression. The same rod is compressed by forces with the same magnitude in the opposite direction. For very small deformations and uniform materials, ΔL is approximately the same for the same magnitude of tension or compression. For larger deformations, the cross-sectional area changes as the rod is compressed or stretched.

Experiments have shown that the change in length (ΔL) depends on only a few variables. As already noted, ΔL is proportional to the force F and depends on the substance from which the object is made. Additionally, the change in length is proportional to the original length L0 and inversely proportional to the cross-sectional area of the wire or rod. For example, a long guitar string will stretch more than a short one, and a thick string will stretch less than a thin one. We can combine all these factors into one equation for ΔL:

[latex]\boldsymbol{\Delta{L}\:=}[/latex][latex]\boldsymbol{\frac{1}{Y}\frac{\vec{\textbf{F}}}{A}}[/latex][latex]\boldsymbol{L_0},[/latex]

where ΔL is the change in length, F the applied force, Y is a factor, called the elastic modulus or Young’s modulus, that depends on the substance, A is the cross-sectional area, and L0 is the original length. Table 3 lists values of Y for several materials—those with a large Y are said to have a large tensile stiffness because they deform less for a given tension or compression.

Material Young’s modulus (tension–compression)Y[latex]\boldsymbol{(10^9\textbf{N/m}^2)}[/latex] Shear modulus S[latex]\boldsymbol{(10^9\textbf{N/m}^2)}[/latex] Bulk modulus B[latex]\boldsymbol{(10^9\textbf{N/m}^2)}[/latex]
Aluminum 70 25 75
Bone – tension 16 80 8
Bone – compression 9
Brass 90 35 75
Brick 15
Concrete 20
Glass 70 20 30
Granite 45 20 45
Hair (human) 10
Hardwood 15 10
Iron, cast 100 40 90
Lead 16 5 50
Marble 60 20 70
Nylon 5
Polystyrene 3
Silk 6
Spider thread 3
Steel 210 80 130
Tendon 1
Acetone 0.7
Ethanol 0.9
Glycerin 4.5
Mercury 25
Water 2.2
Table 3. Elastic Moduli1.

Young’s moduli are not listed for liquids and gases in Table 3 because they cannot be stretched or compressed in only one direction. Note that there is an assumption that the object does not accelerate, so that there are actually two applied forces of magnitude F acting in opposite directions. For example, the strings in Figure 3 are being pulled down by a force of magnitude w and held up by the ceiling, which also exerts a force of magnitude w.

Example 1: The Stretch of a Long Cable

Suspension cables are used to carry gondolas at ski resorts. (See Figure 4) Consider a suspension cable that includes an unsupported span of 3 km. Calculate the amount of stretch in the steel cable. Assume that the cable has a diameter of 5.6 cm and the maximum tension it can withstand is 3.0 × 106 N.

Ski gondolas travel along suspension cables. A vast forest and snowy mountain peaks can be seen in the background.
Figure 4. Gondolas travel along suspension cables at the Gala Yuzawa ski resort in Japan. (credit: Rudy Herman, Flickr)

Strategy

The force is equal to the maximum tension, or F = 3.0 × 106 N. The cross-sectional area is  πr2  =  2.46 × 10-3 m2. The equation [latex]\boldsymbol{\Delta{L} = \frac{1}{Y}\frac{F}{A}L_0}[/latex] can be used to find the change in length.

Solution

All quantities are known. Thus,

[latex]\boldsymbol{\Delta{L}\:=(\frac{1}{210\times10^9\textbf{ N/m}^2})(\frac{3.0\times10^6\textbf{ N}}{2.46\times10^{-3}\textbf{ m}^2})(3020\textbf{ m})}[/latex]
[latex]\boldsymbol{=18\textbf{ m}}.[/latex]

Discussion

This is quite a stretch, but only about 0.6% of the unsupported length. Effects of temperature upon length might be important in these environments.

Bones, on the whole, do not fracture due to tension or compression. Rather they generally fracture due to sideways impact or bending, resulting in the bone shearing or snapping. The behaviour of bones under tension and compression is important because it determines the load the bones can carry. Bones are classified as weight-bearing structures such as columns in buildings and trees. Weight-bearing structures have special features; columns in building have steel-reinforcing rods while trees and bones are fibrous. The bones in different parts of the body serve different structural functions and are prone to different stresses. Thus the bone in the top of the femur is arranged in thin sheets separated by marrow while in other places the bones can be cylindrical and filled with marrow or just solid. Overweight people have a tendency toward bone damage due to sustained compressions in bone joints and tendons.

Another biological example of Hooke’s law occurs in tendons. Functionally, the tendon (the tissue connecting muscle to bone) must stretch easily at first when a force is applied, but offer a much greater restoring force for a greater strain. Figure 5 shows a stress-strain relationship for a human tendon. Some tendons have a high collagen content so there is relatively little strain, or length change; others, like support tendons (as in the leg) can change length up to 10%. Note that this stress-strain curve is nonlinear, since the slope of the line changes in different regions. In the first part of the stretch called the toe region, the fibers in the tendon begin to align in the direction of the stress—this is called uncrimping. In the linear region, the fibrils will be stretched, and in the failure region individual fibers begin to break. A simple model of this relationship can be illustrated by springs in parallel: different springs are activated at different lengths of stretch. Examples of this are given in the problems at end of this chapter. Ligaments (tissue connecting bone to bone) behave in a similar way.

The strain on mammalian tendon is shown by a graph, with strain along the x axis and tensile stress along the y axis. The stress strain curve obtained has three regions, namely, toe region at the bottom, linear region between, and failure region at the top.
Figure 5. Typical stress-strain curve for mammalian tendon. Three regions are shown: (1) toe region (2) linear region, and (3) failure region.

Unlike bones and tendons, which need to be strong as well as elastic, the arteries and lungs need to be very stretchable. The elastic properties of the arteries are essential for blood flow. The pressure in the arteries increases and arterial walls stretch when the blood is pumped out of the heart. When the aortic valve shuts, the pressure in the arteries drops and the arterial walls relax to maintain the blood flow. When you feel your pulse, you are feeling exactly this—the elastic behaviour of the arteries as the blood gushes through with each pump of the heart. If the arteries were rigid, you would not feel a pulse. The heart is also an organ with special elastic properties. The lungs expand with muscular effort when we breathe in but relax freely and elastically when we breathe out. Our skins are particularly elastic, especially for the young. A young person can go from 100 kg to 60 kg with no visible sag in their skins. The elasticity of all organs reduces with age. Gradual physiological aging through reduction in elasticity starts in the early 20s.

Example 2: Calculating Deformation: How Much Does Your Leg Shorten When You Stand on It?

Calculate the change in length of the upper leg bone (the femur) when a 70.0 kg man supports 62.0 kg of his mass on it, assuming the bone to be equivalent to a uniform rod that is 40.0 cm long and 2.00 cm in radius.

Strategy

The force is equal to the weight supported, or

[latex]\boldsymbol{F = mg =(62.0\textbf{ kg})(9.80\textbf{ m/s}^2) = 607.6\textbf{ N}},[/latex]

and the cross-sectional area is  πr2  =  1.257 × 10-3 m2. The equation [latex]\boldsymbol{\Delta{L} = \frac{1}{Y}\frac{F}{A}L_0}[/latex] can be used to find the change in length.

Solution

All quantities except ΔL are known. Note that the compression value for Young’s modulus for bone must be used here. Thus,

[latex]\boldsymbol{\Delta{L}=(\frac{1}{9\times10^9\textbf{ N/m}^2})(\frac{607.6\textbf{ N}}{1.257\times10^{-3}\textbf{ m}^2})(0.400\textbf{ m})}[/latex]
[latex]\boldsymbol{=2\times10^{-5}\textbf{ m}}.[/latex]

Discussion

This small change in length seems reasonable, consistent with our experience that bones are rigid. In fact, even the rather large forces encountered during strenuous physical activity do not compress or bend bones by large amounts. Although bone is rigid compared with fat or muscle, several of the substances listed in Table 3 have larger values of Young’s modulus Y. In other words, they are more rigid.

The equation for change in length is traditionally rearranged and written in the following form:

[latex]\boldsymbol{\frac{F}{A}}[/latex][latex]\boldsymbol{=Y}[/latex][latex]\boldsymbol{\frac{\Delta{L}}{L_0}}.[/latex]

The ratio of force to area, [latex]\boldsymbol{\frac{F}{A}},[/latex]  is defined as stress (measured in N/m2), and the ratio of the change in length to length,[latex]\boldsymbol{\frac{\Delta{L}}{L_0}},[/latex]is defined as strain (a unitless quantity). In other words,

[latex]\boldsymbol{\textbf{stress}=Y\times\textbf{strain}}.[/latex]

In this form, the equation is analogous to Hooke’s law, with stress analogous to force and strain analogous to deformation. If we again rearrange this equation to the form

[latex]\boldsymbol{F=YA}[/latex][latex]\boldsymbol{\frac{\Delta{L}}{L_0}},[/latex]

we see that it is the same as Hooke’s law with a proportionality constant

[latex]\boldsymbol{k\:=}[/latex][latex]\boldsymbol{\frac{YA}{L_0}}.[/latex]

This general idea—that force and the deformation it causes are proportional for small deformations—applies to changes in length, sideways bending, and changes in volume.

STRESS

The ratio of force to area, [latex]\boldsymbol{\frac{F}{A}},[/latex] is defined as stress measured in N/m2.

STRAIN

The ratio of the change in length to length, [latex]\boldsymbol{\frac{\Delta{L}}{L_0}},[/latex] is defined as strain (a unitless quantity). In other words,

[latex]\boldsymbol{\textbf{stress}=Y\times\textbf{strain}}.[/latex]

Section Summary

  • Hooke’s law is given by
    [latex]\boldsymbol{F=k\Delta{L}},[/latex]    or  [latex]\boldsymbol{F=k\Delta{x}},[/latex]

    where ΔL is the amount of deformation (the change in length), F is the applied force, and k is a proportionality constant that depends on the shape and composition of the object and the direction of the force. The relationship between the deformation and the applied force can also be written as

    [latex]\boldsymbol{\Delta{L}\:=}[/latex][latex]\boldsymbol{\frac{1}{Y}\frac{F}{A}}[/latex][latex]\boldsymbol{L_0},[/latex]

    where Y is Young’s modulus, which depends on the substance, A is the cross-sectional area, and L0 is the original length.

  • The ratio of force to area, [latex]\boldsymbol{\frac{F}{A}},[/latex] is defined as stress, measured in N/m2.
  • The ratio of the change in length to length, [latex]\boldsymbol{\frac{\Delta{L}}{L_0}},[/latex] is defined as strain (a unitless quantity). In other words,
    [latex]\boldsymbol{\textbf{stress}=Y\times\textbf{strain}}.[/latex]

Conceptual Questions

1: The elastic properties of the arteries are essential for blood flow. Explain the importance of this in terms of the characteristics of the flow of blood (pulsating or continuous).

2: What are you feeling when you feel your pulse? Measure your pulse rate for 10 s and for 1 min. Is there a factor of 6 difference?

3: Examine different types of shoes, including sports shoes and thongs. In terms of physics, why are the bottom surfaces designed as they are? What differences will dry and wet conditions make for these surfaces?

4: Would you expect your height to be different depending upon the time of day? Why or why not?

5: Why can a squirrel jump from a tree branch to the ground and run away undamaged, while a human could break a bone in such a fall?

Problems & Exercises

1: During a circus act, one performer swings upside down hanging from a trapeze holding another, also upside-down, performer by the legs. If the upward force on the lower performer is three times her weight, how much do the bones (the femurs) in her upper legs stretch? You may assume each is equivalent to a uniform rod 35.0 cm long and 1.80 cm in radius. Her mass is 60.0 kg.

2: During a wrestling match, a 150 kg wrestler briefly stands on one hand during a maneuver designed to perplex his already moribund adversary. By how much does the upper arm bone shorten in length? The bone can be represented by a uniform rod 38.0 cm in length and 2.10 cm in radius.

3: (a) The “lead” in pencils is a graphite composition with a Young’s modulus of about 1 × 109 N/m2. Calculate the change in length of the lead in an automatic pencil if you tap it straight into the pencil with a force of 4.0 N. The lead is 0.50 mm in diameter and 60 mm long. (b) Is the answer reasonable? That is, does it seem to be consistent with what you have observed when using pencils?

4: TV broadcast antennas are the tallest artificial structures on Earth. In 1987, a 72.0-kg physicist placed himself and 400 kg of equipment at the top of one 610-m high antenna to perform gravity experiments. By how much was the antenna compressed, if we consider it to be equivalent to a steel cylinder 0.150 m in radius?

5: (a) By how much does a 65.0-kg mountain climber stretch her 0.800-cm diameter nylon rope when she hangs 35.0 m below a rock outcropping? (b) Does the answer seem to be consistent with what you have observed for nylon ropes? Would it make sense if the rope were actually a bungee cord?

7: As an oil well is drilled, each new section of drill pipe supports its own weight and that of the pipe and drill bit beneath it. Calculate the stretch in a new 6.00 m length of steel pipe that supports 3.00 km of pipe having a mass of 20.0 kg/m and a 100-kg drill bit. The pipe is equivalent in stiffness to a solid cylinder 5.00 cm in diameter.

8: Calculate the force a piano tuner applies to stretch a steel piano wire 8.00 mm, if the wire is originally 0.850 mm in diameter and 1.35 m long.

12: To consider the effect of wires hung on poles, we take data from Chapter 4.7 Example 2, in which tensions in wires supporting a traffic light were calculated. The left wire made an angle 30.0° below the horizontal with the top of its pole and carried a tension of 108 N. The 12.0 m tall hollow aluminum pole is equivalent in stiffness to a 4.50 cm diameter solid cylinder. (a) How far is it bent to the side? (b) By how much is it compressed?

15: This problem returns to the tightrope walker studied in Chapter 4.5 Example 2, who created a tension of 3.94 × 103 N in a wire making an angle 5.0° below the horizontal with each supporting pole. Calculate how much this tension stretches the steel wire if it was originally 15 m long and 0.50 cm in diameter.

Footnotes

  1. 1 Approximate and average values. Young’s moduli Y for tension and compression sometimes differ but are averaged here. Bone has significantly different Young’s moduli for tension and compression.

Glossary

deformation
change in shape due to the application of force
Hooke’s law
proportional relationship between the force F on a material and the deformation ΔL it causes, F = kΔL
tensile strength
the breaking stress that will cause permanent deformation or fraction of a material
stress
ratio of force to area
strain
ratio of change in length to original length
shear deformation
deformation perpendicular to the original length of an object

Solutions

Problems & Exercises

1: [latex]\boldsymbol{1.90\times10^{-3}\textbf{ cm}}[/latex]

3: (a) $$\boldsymbol{1\textbf{ mm}}$$ (b) This does seem reasonable, since the lead does seem to shrink a little when you push on it.

5: (a) $$\boldsymbol{9\textbf{ cm}}$$ (b) This seems reasonable for nylon climbing rope, since it is not supposed to stretch that much.

7: $$\boldsymbol{8.59\textbf{ mm}}$$

9: [latex]\boldsymbol{1.49\times10^{-7}\textbf{ m}}[/latex]

11: (a) [latex]\boldsymbol{3.99\times10^{-7}\textbf{ m}}[/latex] (b) [latex]\boldsymbol{9.67\times10^{-8}\textbf{ m}}[/latex]

13: [latex]\boldsymbol{4\times10^6\textbf{ N/m}^2}.[/latex] This is about 36 atm, greater than a typical jar can withstand.

15: $$\boldsymbol{1.4\textbf{ cm}}$$

License

Icon for the Creative Commons Attribution 4.0 International License

x-Douglas College Physics 1107 Fall 2019 Custom Textbook Copyright © August 22, 2016 by OpenStax is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book