3 Working Between Gallons and Litres
Click play on the following audio player to listen along as you read this section.
Let’s start with what we know.
Our goal in this chapter is to take all this information and figure out the relationship between gallons and litres. What we should calculate first is some type of common ground between the variables.
In the end the simplest way to express the common ground between the three might just be cubic feet. If we could calculate how many cubic feet are in an imperial gallon, a U.S. gallon as well as a litre then we could find the relationship between the three.
If you remember we already calculated the number of cubic feet in an imperial gallon as well as a U.S. gallon.
Here are those numbers once again.
Let’s throw down some logic right about now to work through this. Remember back a few chapters ago we found out the following:
Now in this chapter we determined that:
Well then it makes sense that:
We can use this last nugget of information in order to calculate the number of cubic feet in one litre. We’ll cross multiply as that seems to come in handy for this type of stuff. First let’s take a look at a little visual which takes us through the logic we just went through.
Now back to cross multiplying in order to find the number of cubic feet in one litre.
As you can see I’ve taken this to four decimal places. This is not something I usually do but as this is a small number being more exact will help us get a more exact answer in the end.
We can now write down each of the capacities in cubic feet.
From those three pieces of information we should be able to calculate the relationship between litres and gallons. We’ll start with imperial gallons. Once again let’s do a little cross multiplying.
Remember that the 0.160 cubic feet in the above equation represents the number of cubic feet in an imperial gallon.
So in the end we get:
If you had gone through and done the math above you would find that it actually comes out to 4.53. No worries though. The reason its off by 0.01 is due to rounding earlier on in the process. For our purposes we’ll always go with 1 imperial gallon = 4.54 litres.
Next up is U.S. gallons. Do the same cross multiplying.
Once again going through the actual math would give us an answer of 3.77. We’re off by 0.01 due to rounding so in the end the number we always want to go with is 1 U.S. gallon = 3.78 litres.
So in the end we get that:
Now we have the numbers we are looking for. Just for fun take 3.78 and add 20 percent to it. Remember that an imperial gallon is twenty percent larger than a U.S. gallon. You can do this mathematically by multiplying by 1.2.
It’s all working out and everyone is happy!
Here’s a quick summary.
We’re going to move on to some example in a second but I’d like to make a suggestion at this point. We’ve just gone through a fair bit of math and calculated a number of numbers.
You might want to go back to the start of this section and reread it before moving on. Maybe try taking some notes and summarizing what you just read through.
Example
A fish tank has a capacity of 828 imperial gallons. How many litres does the fish tank contain if it is filled right to the top?
Step 1: Write down the formula you’ll be working with.
Step 2: Get your cross multiplying going.
Example
A gas can contains 10 litres. How many U.S. gallons does it contain?
Step 1: Write down the formula you’ll we working with.
Step 2: Cross multiply
Try a couple practice questions yourself and check the video answers to see how you did.
Practice Questions
Question 1
Rory is a plumber and is called to replace a leaking hot water tank. Otto is the Swiss homeowner and tells her the capacity of the hot water tank in litres. Rory is required to purchase a new hot water tank but the capacities are all in U.S. gallons. Also note that the new hot water tank must be 20% larger than the old one due to the fact that the old one could not keep up with demand. The current size of the hot water tank is 126 litres. What is the size of the new tank in U.S. gallons?
Question 2
Kiendra is a hydronic heating specialist who installs and services boiler systems around the city of Victoria. Boiler systems may require glycol (essentially anitfreeze) and the current system Kiendra is working on requires 20 litres of glycol to be added. How many imperial gallons would this work out to be?